A, AT-12 A learning board main features:
http://www.siliconray.com/stc-8051-standard-kit.html
1. Direct USB port the power supply can be through the computer USB port download program, convenient no serial notebook computer download and direct burn to write programs.
2. Direct download and write program online, don't need to purchase another single-chip microcomputer and writing implement, also can at any time convenient to burn to write programs to the single chip microcomputer program operation in check, learning, commissioning
Program of frequent and write save complex, changing pieces process.
3. A direct online simulation function, don't need another purchase expensive emulator. The chip in experiment, and directly online one step, commissioning at full speed.
4. The day AT-12 A learning board set experiment development board, A programming console, and write device, simulators four one, simple and efficiency.
5. Rich hardware resources: AD modulus conversion chip, DA ? number
2011年12月30日星期五
Based on SCM speech recognition of the module design response system have?
#include "A2000.h"
#define SPEECH_1 0
#define DAC1 1
#define DAC2 2
#define Ramp_UpDn_Off 0
#define Ramp_UpDn_On 3
#define Manual 0
#define Auto 1
#define Full 1
#define Empty 2
#define Mode 1
//=============================================================================================== http://www.siliconray.com/robots/l293-quadruple-half-h-motor-driver-module.html
//===============================================================================================
main()
{
extern long RES_WW_24K_SA,RES_WW_24K_EA; //
long int Addr; //
int Ret = 0; //
if(Mode == 1) //
{
SACM_A2000_Initial(1); //
SACM_A2000_Play(SPEECH_1,DAC1,Ramp_UpDn_On); //
while(1){
F_ClearWatchdog();
SACM_A2000_ServiceLoop();} //
}
if(Mode == 0) //
{
Addr=RES_WW_24K_SA; //
SACM_A2000_Initial(0); //
SACM_A2000_InitDecoder(DAC1); //
while(SACM_A2000_TestQueue()!=Full) //
{
Ret=SP_GetResource(Addr); //
SACM_A2000_FillQueue(Ret); //
Addr++;
}
while(1)
{
if(SACM_A2000_TestQueue()!=Full)
{
Ret =SP_GetResource(Addr);
SACM_A2000_FillQueue(Ret);
Addr++;
}
if(Addr< RES_WW_24K_EA )
SACM_A2000_Decoder();
else
SACM_A2000_Stop(); //
F_ClearWatchdog();
}
}
}
#define SPEECH_1 0
#define DAC1 1
#define DAC2 2
#define Ramp_UpDn_Off 0
#define Ramp_UpDn_On 3
#define Manual 0
#define Auto 1
#define Full 1
#define Empty 2
#define Mode 1
//=============================================================================================== http://www.siliconray.com/robots/l293-quadruple-half-h-motor-driver-module.html
//===============================================================================================
main()
{
extern long RES_WW_24K_SA,RES_WW_24K_EA; //
long int Addr; //
int Ret = 0; //
if(Mode == 1) //
{
SACM_A2000_Initial(1); //
SACM_A2000_Play(SPEECH_1,DAC1,Ramp_UpDn_On); //
while(1){
F_ClearWatchdog();
SACM_A2000_ServiceLoop();} //
}
if(Mode == 0) //
{
Addr=RES_WW_24K_SA; //
SACM_A2000_Initial(0); //
SACM_A2000_InitDecoder(DAC1); //
while(SACM_A2000_TestQueue()!=Full) //
{
Ret=SP_GetResource(Addr); //
SACM_A2000_FillQueue(Ret); //
Addr++;
}
while(1)
{
if(SACM_A2000_TestQueue()!=Full)
{
Ret =SP_GetResource(Addr);
SACM_A2000_FillQueue(Ret);
Addr++;
}
if(Addr< RES_WW_24K_EA )
SACM_A2000_Decoder();
else
SACM_A2000_Stop(); //
F_ClearWatchdog();
}
}
}
2011年12月28日星期三
Based on 51 SCM infrared induction door graduation design
This paper introduces the 8051 single chip microcomputer, the application of single chip, to be automatic infrared induction door technology and application, etc. Design a simple 51 single-chip microcomputer based on infrared automatic induction door, and gives a simple test procedures and interface circuit.
Key word: 8051 single chip microcomputer; Infrared sensors.
http://www.siliconray.com/catalogsearch/result/?q=8051
4 design part
4.1 the design requirements
The design aims to design a simple function of 51 single-chip microcomputer control infrared automatic induction door. And presents a simple test procedures.
4.2 this design part and principle
Infrared automatic induction door mainly by the following seven parts.
(1). The Lord controller: induction door command center, through the internal entities of the single chip microcomputer instruction to issue a corresponding instruction, command motor, etc. Also, people can
Key word: 8051 single chip microcomputer; Infrared sensors.
http://www.siliconray.com/catalogsearch/result/?q=8051
4 design part
4.1 the design requirements
The design aims to design a simple function of 51 single-chip microcomputer control infrared automatic induction door. And presents a simple test procedures.
4.2 this design part and principle
Infrared automatic induction door mainly by the following seven parts.
(1). The Lord controller: induction door command center, through the internal entities of the single chip microcomputer instruction to issue a corresponding instruction, command motor, etc. Also, people can
Excuse me, which a player know the laser rangefinder system based on single chip the graduation design to do?
Design requirements
1. Basic requirements
(1) the measuring range 0.10-5.00 M;
(2) can steadily display measured results;
(3) can differ according to the length of the distance of the frequency of sound. Problems added:
A, design task
Simulation design and production of a laser rangefinder system.
Second, the design requirements
1. Basic requirements
(1) the measuring range 0.10-5.00 M;
(2) can steadily display measured results;
(3) can differ according to the length of the distance of the frequency of sound.
2. Play a part
(1) can be applied to the industrial field position monitoring;
(2) can be used for liquid level, well depth, length of pipe of the survey;
(3) speech function;
http://siliconray.blog.com/
1. Basic requirements
(1) the measuring range 0.10-5.00 M;
(2) can steadily display measured results;
(3) can differ according to the length of the distance of the frequency of sound. Problems added:
A, design task
Simulation design and production of a laser rangefinder system.
Second, the design requirements
1. Basic requirements
(1) the measuring range 0.10-5.00 M;
(2) can steadily display measured results;
(3) can differ according to the length of the distance of the frequency of sound.
2. Play a part
(1) can be applied to the industrial field position monitoring;
(2) can be used for liquid level, well depth, length of pipe of the survey;
(3) speech function;
http://siliconray.blog.com/
2011年12月27日星期二
Siliconray:BP103-04 STM32F103VET6 Development Board
Siliconray:BP103-04 STM32F103VET6 Development Board
BP103-04 STM32F103VET6 development board
http://www.siliconray.com/stm32-arm-starter-kit.html
1, STM32F103VET6 chip
2, 320 * 240 get 2.4 inch TFT color LCD mode
3, JTAG connectors, reset button
Four, 32.768 KHZ and 8 MHZ crystal
5, 5 V chips AMS1117 3.3 V-3.3
6 and RS232 uart, UART1 and UART2 can set jump shots
7, all the I/O is the name of the sign of the lead and I/O
8, it supports USB power supply, JLink power.
Data:
Principle (PDF format)
Related sound code
Accessories list:
1 STM32F103VE development board
http://www.siliconray.com/stm32-arm-starter-kit.html
1, STM32F103VET6 chip
2, 320 * 240 get 2.4 inch TFT color LCD mode
3, JTAG connectors, reset button
Four, 32.768 KHZ and 8 MHZ crystal
5, 5 V chips AMS1117 3.3 V-3.3
6 and RS232 uart, UART1 and UART2 can set jump shots
7, all the I/O is the name of the sign of the lead and I/O
8, it supports USB power supply, JLink power.
Data:
Principle (PDF format)
Related sound code
Accessories list:
1 STM32F103VE development board
Siliconray:ATmega128 MCU Starter Kit
Siliconray:ATmega128 MCU Starter Kit
http://www.siliconray.com/development-boards/avr/atmega128-mcu-starter-kits.html
1. SCM: ATmega128A/ATmega128 / ATmega128L;
2. Advertising is the reference voltage converter inductance and capacitance network.
3. But by external crystal jumpers.
4. Dip connector to all the I/O mouth;
5. The ISP and JTAG connectors;
6. Stable reset circuit;
7. Drive two leds and PA0 PA1 provide simple test;
8. The power and the I/O brooch is 5 V;
9. PCB size: 52.3 MMx80MM
http://www.siliconray.com/development-boards/avr/atmega128-mcu-starter-kits.html
2. Advertising is the reference voltage converter inductance and capacitance network.
3. But by external crystal jumpers.
4. Dip connector to all the I/O mouth;
5. The ISP and JTAG connectors;
6. Stable reset circuit;
7. Drive two leds and PA0 PA1 provide simple test;
8. The power and the I/O brooch is 5 V;
9. PCB size: 52.3 MMx80MM
2011年12月22日星期四
TA2024 high quality audio amplifier D
Feature:
Power: 15Wx2 @4Ohm, 10Wx2 @8Ohm
Power supply: 12V-15V 3A
0.04% THD
Designed with Tripath TA2024
All HiFi capacitors design
Effeciency: >88%
No heatsink needed
Compact size 90mm x 66mm
Short circuit and thermal protection
VMR6512 high-fidelity audio FM transmitter module
VMR6512 high-fidelity audio FM transmitter module
Features
●Broadcast standard sound quality
●Fully integrated encapsulation, it can work without any external components.
●Audio frequency processed by DSP, guaranting high quality sound
●Using frequency synthetic technology, high stability of oscillation frequency
●Output power adjustable. (up to 115dBuV)
●Frequency range is 88.0MHz to 108.0MHz, low-end can be extended to 76.0MHz upon request.
●It can input analog audio or digital audio
●It possesses external UART interface and can be easily controlled by external CPU or PC machines
●It provides frequency setting UP / DOWN input and can be used independently.
Applications
●Hi-Fi wireless headphone
●MP3 audio transponder in the car
●Wireless microphones
●Conference Broadcasting System
● In building music broadcasting
● In park music broadcasting
●Accessories of audio-visual entertainment equipment
●Radio station in campus
Features
●Broadcast standard sound quality
●Fully integrated encapsulation, it can work without any external components.
●Audio frequency processed by DSP, guaranting high quality sound
●Using frequency synthetic technology, high stability of oscillation frequency
●Output power adjustable. (up to 115dBuV)
●Frequency range is 88.0MHz to 108.0MHz, low-end can be extended to 76.0MHz upon request.
●It can input analog audio or digital audio
●It possesses external UART interface and can be easily controlled by external CPU or PC machines
●It provides frequency setting UP / DOWN input and can be used independently.
Applications
●Hi-Fi wireless headphone
●MP3 audio transponder in the car
●Wireless microphones
●Conference Broadcasting System
● In building music broadcasting
● In park music broadcasting
●Accessories of audio-visual entertainment equipment
●Radio station in campus
2011年12月20日星期二
6N3 Tube HiFi Buffer Audio Preamplifier
Brief introduction
It is a classic Matisse design. All components on the board are high quality audio parts. Low cost, easy to use, excellent sound quality.
Feature
- Classic Matisse design
- 2mm PCB, high rigid and reliablity
- 6N3 tube
- Freq response: 10Hz-30kHz ±1dB
- Gain: 16dB
- THD: <0.8%
HiFi
- Output power: 500mW
- Input impedance: 100 kΩ
- Output Impedance: 2kΩ
- Panasonic high voltage capacitor
- 1% metal film resistors
- Small sealed potentialmeter
- 125x73x115 small size
- Matched components
- Carefully adjusted before shipping
- Shipped with transformer
It is a classic Matisse design. All components on the board are high quality audio parts. Low cost, easy to use, excellent sound quality.
Feature
- Classic Matisse design
- 2mm PCB, high rigid and reliablity
- 6N3 tube
- Freq response: 10Hz-30kHz ±1dB
- Gain: 16dB
- THD: <0.8%
HiFi
- Output power: 500mW
- Input impedance: 100 kΩ
- Output Impedance: 2kΩ
- Panasonic high voltage capacitor
- 1% metal film resistors
- Small sealed potentialmeter
- 125x73x115 small size
- Matched components
- Carefully adjusted before shipping
- Shipped with transformer
Tripath TA0105A 800Wx2 Super Class-T Audio Amplifier
Tripath TA0105A 800Wx2 Super Class-T Audio Amplifier
Brief introduction
This product uses rare TA0105A digital amplifier driver from Tripath. It is regarded as one of the best amplifier chip. Famous audio equipment's Audio Research has used it chip to design their Model 300.2 amplifier.
audio amplifier
Features
Use IRFP4227 as the power MOSFET
- 800Wx2 output power (4Ohm, 10THD)
- Designed with rare TA0105A class-T amplifier chip
- 0.1% THD @ 500W 4Ohm
- Dimension: 185x115mm
- All made with HiFi components
- Main power: ±58V to ±90V
- Need 5V 0.1A and 12V 0.3A as digital power
Brief introduction
This product uses rare TA0105A digital amplifier driver from Tripath. It is regarded as one of the best amplifier chip. Famous audio equipment's Audio Research has used it chip to design their Model 300.2 amplifier.
audio amplifier
Features
Use IRFP4227 as the power MOSFET
- 800Wx2 output power (4Ohm, 10THD)
- Designed with rare TA0105A class-T amplifier chip
- 0.1% THD @ 500W 4Ohm
- Dimension: 185x115mm
- All made with HiFi components
- Main power: ±58V to ±90V
- Need 5V 0.1A and 12V 0.3A as digital power
2011年12月12日星期一
VMA2016-EVB
http://www.siliconray.com/vma2016-evb.html
This board is a tiny power amplifier board designed with VMA2016. It has one stereo audio input jack, 1 power supply connector and 2 speaker connectors. There's one jumper for enable signal and tow for gain setting of VMA2016. With the outstanding performance of VMA2016 audio amplifier module it can drive 2 8Ohm speaker to unbelievable10W per channel! You just can't believe this small board can singing that loud. The noise is very low and sound quality is excellent (0.07% THD+N). Ultra small size makes it very easy to fit in any speaker boxes to build an active speaker.
Siliconray:NE555 Timer / Oscillator
Siliconray:NE555 Timer / Oscillator
NE555
Brief introduction:
The 555 monolithic timing circuit is a highly stable controller capable of producing accurate time delays or oscillation. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For a stable operation as an oscillator, the free running frequency and the duty cycle are both accurately controlled with two external resistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and the output structure can source or sink up to 200 mA.
Features:
Max. operating frequency greater than 500 kHz
Turn-off time less than 2 ms
Temperature stability of 0.005% per °C
Timing from microseconds to hours
Adjustable duty cycle
Operates in both astable and monostable modes
High output current
TTL compatible
Applications:
Precision timing
Pulse generation
Sequential timing
Time delay generation
Pulse width modulation
NE555
Brief introduction:
The 555 monolithic timing circuit is a highly stable controller capable of producing accurate time delays or oscillation. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For a stable operation as an oscillator, the free running frequency and the duty cycle are both accurately controlled with two external resistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and the output structure can source or sink up to 200 mA.
Features:
Max. operating frequency greater than 500 kHz
Turn-off time less than 2 ms
Temperature stability of 0.005% per °C
Timing from microseconds to hours
Adjustable duty cycle
Operates in both astable and monostable modes
High output current
TTL compatible
Applications:
Precision timing
Pulse generation
Sequential timing
Time delay generation
Pulse width modulation
2011年12月8日星期四
Factory Pair Matched main grade 300B-Z power tube
Derscription
Factory Pair Matched main grade 300B-Z power tube
Features
- Super alloy technology
- Use "High Polymer Compound Carbon" material
- Gold grid
- Factory pair matched
- Gold plated pin, ceramic base
- Super high vacuum
- Suited for 10W audio power amplifier
Note
- The Royal Edition has better match accuracy and package.
http://www.siliconray.com/factory-pair-matched-shuguang-300b-98-tube-1.html
Factory Pair Matched main grade 300B-Z power tube
- Super alloy technology
- Use "High Polymer Compound Carbon" material
- Gold grid
- Factory pair matched
- Gold plated pin, ceramic base
- Super high vacuum
- Suited for 10W audio power amplifier
Note
- The Royal Edition has better match accuracy and package.
http://www.siliconray.com/factory-pair-matched-shuguang-300b-98-tube-1.html
2011年12月5日星期一
Siliconray：Atmega128 Standard Kit
Siliconray：Atmega128 Standard Kit
http://www.siliconray.com/catalogsearch/result/?q=Atmega128+Standard+Kit
CPU：ATmega128 has 128K Flash、4K SRAM and 4KByte EEPROM, and chip can exchange with ATmega64
MAX485 used for 485 industry test
I2C bus device 24C02, EEPROM data memorizer and 8kBit EEPROM
Infrared receive connector test
Stepper motor driver test
DC Motor test
12C RTC chip used for calendar and clock test
SPI device, 74HC595 drives 4bit 7 -segment LED
SPI device, DAC7512 12bit D/A converter
Flip-latch: 74HC573 latches and drives 8 bit LED
RS232 connector Max232A
8 input keys, 1 reset key
4 bit dynamic scanning 7 -segment LED and 8 bit LED
1 active buzzer
2 A/D input tunable potentiometer
LCD1602and LCD12864 connector
JTAG emulational connector
AVR ISP download connector
Standard configuration:
1 TS8900-M128 development board
1 UART cable
1 AVR-USB emulator
1 DAC7512 digifax convert chip
1 infrared telecontroller
1 stepper motor driver
1 multiple flat cable
1 1.8GB-DVD CD
10 jumpers, 4 screws and 4 multiple-screw bolts
http://www.siliconray.com/catalogsearch/result/?q=Atmega128+Standard+Kit
CPU：ATmega128 has 128K Flash、4K SRAM and 4KByte EEPROM, and chip can exchange with ATmega64
MAX485 used for 485 industry test
I2C bus device 24C02, EEPROM data memorizer and 8kBit EEPROM
Infrared receive connector test
Stepper motor driver test
DC Motor test
12C RTC chip used for calendar and clock test
SPI device, 74HC595 drives 4bit 7 -segment LED
SPI device, DAC7512 12bit D/A converter
Flip-latch: 74HC573 latches and drives 8 bit LED
RS232 connector Max232A
8 input keys, 1 reset key
4 bit dynamic scanning 7 -segment LED and 8 bit LED
1 active buzzer
2 A/D input tunable potentiometer
LCD1602and LCD12864 connector
JTAG emulational connector
AVR ISP download connector
Standard configuration:
1 TS8900-M128 development board
1 UART cable
1 AVR-USB emulator
1 DAC7512 digifax convert chip
1 infrared telecontroller
1 stepper motor driver
1 multiple flat cable
1 1.8GB-DVD CD
10 jumpers, 4 screws and 4 multiple-screw bolts
microcontroller evaluation board design Atmega128 Professional Kit
http://www.siliconray.com/catalogsearch/result/?q=Atmega128+Professional+Kit
Resources of development board:
* DAC audio output
* SD/MMC storage port
* 64K SRAM connected on EBI bus
* CP2102 USB-to-UART bridge
* 2 LED display processors
* 176*220 TFT display module
* ADS7843 touch screen input
* 5-way navikey input
* Photo resistor and potentiometer ADC input
* High-accuracy RTC clock
* Buzzer output
* 2 RS232 ports
* All I/O and EBI bus are led out to extend easily
* JTAG and PDI debugging program
Processor features:
* 128K+8K（BOOT）flash memory ，8K RAM and 4K EEPROM inside
* External Bus Interface for up to 16M bytes SRAM or 128M bit SDRAM
* 4-channel DMA Controller with support for external requests* Eight-channel data bound system
* 8 16-bit Timer, PWM generator and input capture
* 8 USARTs: IrDA modulation/demodulation for one USART
* 4 Two-Wire Interfaces with dual address match (I2C and SMBus compatible)
* 4 SPI (Serial Peripheral Interface) peripherals
* 16-bit Real Time Counter with separate Oscillator
* 2 Eight-channel, 12-bit, 2 Msps Analog to Digital Converters
* 2Two-channel, 12-bit, 1 Msps Digital to Analog Converters
* 4Analog Comparators with Window compare function
* External Interrupts on all General Purpose I/O pins
* Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator
* AES and DES Crypto Engine
* 64 –foot TQFP package, 50 I/O connectors
* Speed performance: – 0 – 12 MHz @ 1.6 – 3.6V
– 0 – 32 MHz @ 2.7 – 3.6V
Development board features:
The product has been burned-in BOOTLOADER program, consumer can download program by USB to XMEGA development board to debug without buying any development tools.
Standard configuration
*AVR-XMEGA3 development board
*1 USB cable
*1 UART cable
*6V power supply
*1 CD
2011年11月30日星期三
this is “1318 CC1101 433MHz Wireless Module”
Applications ：
The product applies to AMR- automatic meter reading,micropower UHF wireless transceiver, AMR- automatic meter reading, electronic consumption product, long-distance remote control, wireless alarm and security system, low-power telemetry,industry detection and control, wireless sense network and wireless wake-up function.
Features：
(1)frequency range: 433M ISM
(2)supply voltage ：3.3V
(3)max working rate: 500kbps
(4)max output power:+23dBm，
max emission current:160mA
(5)lower current consumption（RX，15.6mA，2.4kbps,433MHz）
(6)modulation mode: 2-FSK,GFSK and MSK
(7)64 byte RX and TX data FIFO
(8)high sensitivity
(9)it revises baud rate, power, frequency and other related parameters through SPI interface.
(10)high baud power: faster data transmission rate but closer range
(11)low baud power：stronger interference immunity and penetrating and further transmission range
(12) built-in hardware CRC error detection and point-to-point address control
(13) it supports wireless wake-up function and low-power Hertzian function
(14)standard 2.54mm DIP spacing interface
(15) it supports carrier sense system
The product applies to AMR- automatic meter reading,micropower UHF wireless transceiver, AMR- automatic meter reading, electronic consumption product, long-distance remote control, wireless alarm and security system, low-power telemetry,industry detection and control, wireless sense network and wireless wake-up function.
Features：
(1)frequency range: 433M ISM
(2)supply voltage ：3.3V
(3)max working rate: 500kbps
(4)max output power:+23dBm，
max emission current:160mA
(5)lower current consumption（RX，15.6mA，2.4kbps,433MHz）
(6)modulation mode: 2-FSK,GFSK and MSK
(7)64 byte RX and TX data FIFO
(8)high sensitivity
(9)it revises baud rate, power, frequency and other related parameters through SPI interface.
(10)high baud power: faster data transmission rate but closer range
(11)low baud power：stronger interference immunity and penetrating and further transmission range
(12) built-in hardware CRC error detection and point-to-point address control
(13) it supports wireless wake-up function and low-power Hertzian function
(14)standard 2.54mm DIP spacing interface
(15) it supports carrier sense system
where can you get this? Siliconray.
2011年11月28日星期一
MSP430 JTAG BSL
MSP430 JTAG BSL
Brief introduction:
The emulator is compatible with TI emulator. It has good compatibility and stability and is ideal for studing and developing new products.
Function:
The emulator supports MSP430 FLASH microcontroller emulation debugging and through USB port.
Features:
1. Program and on-line emulate MSP430FLASH series.
2. It is compatible with MSP-FET430 development tool.
3. It uses standard 2X7 PIN connector.
4. It is USB powered without any external power supply and supplies 1.8V~4V power to target board or user board.
5. It supports IAR430、AQ430、HI-TECH、GCC and emulation, debugging, single step, breakpoint setting, and view or revise of memorizer content.
6. It supports u-boot and read-write function of program.
7. It supports JTAG connector debugging.
8. It supports BSL program function (download program)
http://www.siliconray.com/development-boards.html
Accessories List:
1. One MSP430 emulator mainframe of USB type.
2. One USB cable
3. 14 pin JTAG cable, the length is 20cm.
Brief introduction:
The emulator is compatible with TI emulator. It has good compatibility and stability and is ideal for studing and developing new products.
Function:
The emulator supports MSP430 FLASH microcontroller emulation debugging and through USB port.
Features:
1. Program and on-line emulate MSP430FLASH series.
2. It is compatible with MSP-FET430 development tool.
3. It uses standard 2X7 PIN connector.
4. It is USB powered without any external power supply and supplies 1.8V~4V power to target board or user board.
5. It supports IAR430、AQ430、HI-TECH、GCC and emulation, debugging, single step, breakpoint setting, and view or revise of memorizer content.
6. It supports u-boot and read-write function of program.
7. It supports JTAG connector debugging.
8. It supports BSL program function (download program)
http://www.siliconray.com/development-boards.html
Accessories List:
1. One MSP430 emulator mainframe of USB type.
2. One USB cable
3. 14 pin JTAG cable, the length is 20cm.
STC Universal Programmer
Brief introduction
The STC Universal Programmer is the only programmer that can work for all STC micro-controllers. The programmer has both RS-232 port and USB port. USB is also used as power supply port. Programmer can be configured to work in either RS-232 mode or USB mode port through jumper.
The programmer works for both normal voltage (5V) and low voltage (3.3V) devices. The working voltage can be configured through a switch.
There are two external ports on the programmer. They could be used to program Non-DIP devices or STC microcontroller devices on other boards.
On-board resources
l RS233-TTL Level convertor SP3232E
l One 40pin，two 28pin zip IC socket
l 5V/3.3V power supply
l Power On/Off Switch
l 4bits DIP switch for settings
l Two 6pins external connectors
Operating instructions
2． Use USB or RS-232 cable to connect PC and programmer.
3． Move STC ISP software and set up relevant options. Software can be downloaded here: http://www.stc-51.com/softwares.php
4． Make sure power supply is off. Plug chip in correct place of Zip socket and choose proper supply voltage for the device.
5． Choose hex file to be programmed, click “program” button in ISP Software to program.
6． After programming, turn off power supply and take down the chip.
Programmer setting
P01，P11 setting
Chip mount
2011年11月25日星期五
Production process on the pcb board
1, a circuit board. Draw a circuit board with the proper transfer paper, sliding side note in front of you, two circuit boards usually a sheet of paper printed two boards. Choose one of the best in the manufacture of printed circuit boards.
2, cutting the CCA to the board with a photographic plate illustrations. CCA, the copper foil on both sides of the circuit, the circuit of copper on the size of the cut, not too big to save material is coated.
3, Pre-CSF. CCA determined using a fine sandpaper to polish the surface of the oxide layer pipe systems for heat transfer toner to paper printed on laminated copper, polished surface of a plate light right level, not sure of meaningful tasks.
4, the transmission of the circuit. The printed circuit cut into appropriate size, the printed circuit on the side of the CDC, the CCA in the schedule provided for a machine with a good heat transfer, the transfer paper in the time we need to ensure that n 'there is no shift. Usually 2-3 times after the transfer, the circuit can be a very solid transfer to the CCA. The heat transfer machine was preheated in advance, the set temperature to 160-200 degrees Celsius, due to the high temperatures, safety!
5, the corrosion of pipes, the reflow soldering machine. First, check whether the circuit is completed the transfer, so few places you can not transfer oil pumps with black spots. Then you can map an open circuit corrosion and copper film is not completely burned, it will remove the caustic solution to clean the circuit so that a circuit on the best corrosion protection. The composition of the etching solution to concentrated hydrochloric acid, concentrated hydrogen peroxide, water, the ratio of 1:2:3 in the preparation of the etching solution, the first round on the water coupled with concentrated hydrochloric acid, hydrogen peroxide concentration, when the operation of hydrochloric acid, concentrated hydrogen peroxide or corrosive fluid is not properly focused on skin or clothing should be sprayed immediately with clean water, through the use of strong liquor, should the company pay attention to safety!
6, circle drill. PCB electronic components is used, it is necessary for the drilling of a circuit. To select components on the thickness of the pen on different drill rigs in operation, the circuit after a certain stability, drilling may be too slow is not open, please read carefully to use for the operating personnel.
2, cutting the CCA to the board with a photographic plate illustrations. CCA, the copper foil on both sides of the circuit, the circuit of copper on the size of the cut, not too big to save material is coated.
3, Pre-CSF. CCA determined using a fine sandpaper to polish the surface of the oxide layer pipe systems for heat transfer toner to paper printed on laminated copper, polished surface of a plate light right level, not sure of meaningful tasks.
4, the transmission of the circuit. The printed circuit cut into appropriate size, the printed circuit on the side of the CDC, the CCA in the schedule provided for a machine with a good heat transfer, the transfer paper in the time we need to ensure that n 'there is no shift. Usually 2-3 times after the transfer, the circuit can be a very solid transfer to the CCA. The heat transfer machine was preheated in advance, the set temperature to 160-200 degrees Celsius, due to the high temperatures, safety!
5, the corrosion of pipes, the reflow soldering machine. First, check whether the circuit is completed the transfer, so few places you can not transfer oil pumps with black spots. Then you can map an open circuit corrosion and copper film is not completely burned, it will remove the caustic solution to clean the circuit so that a circuit on the best corrosion protection. The composition of the etching solution to concentrated hydrochloric acid, concentrated hydrogen peroxide, water, the ratio of 1:2:3 in the preparation of the etching solution, the first round on the water coupled with concentrated hydrochloric acid, hydrogen peroxide concentration, when the operation of hydrochloric acid, concentrated hydrogen peroxide or corrosive fluid is not properly focused on skin or clothing should be sprayed immediately with clean water, through the use of strong liquor, should the company pay attention to safety!
6, circle drill. PCB electronic components is used, it is necessary for the drilling of a circuit. To select components on the thickness of the pen on different drill rigs in operation, the circuit after a certain stability, drilling may be too slow is not open, please read carefully to use for the operating personnel.
订阅：
博文 (Atom)